CASE CONSTRUCTION CX37C, Operator'S Manual

Page: 46 / 228

2 - SAFETY INFORMATION
(20) Machine control pattern
WARNING
Unexpected machine movement!
Pilot controls have two different backhoe con-
trols patterns; before operating the machine,
check which control function is active.
Failure to comply could result in death or se-
rious injury.
W0185A
The machine control pattern can easily be changed to the
"ISO type" or to the "SAE type" by changing the position
of the lever-pattern.
How to use:
1. Loosen the bolt (1) or (2) .
2. Move the lever to the “ISO” or “SAE” position.
3. After setting the pattern, tighten the bolt to secure the
lever.
NOTE: tighten the bolt (1) for the “ISO” pattern. Tighten
the bolt (2) for the “SAE” pattern.
Location: this sign is located on the left-hand side door of
the cab/canopy.
Quantity: 1
Part number: 48019340
This sign shows the location where a sling is attached to
handle the excavator and the coupling location when the
machine has to be transported on a trailer.
SMIL16MEX3175AA
24
2-30