CASE CONSTRUCTION CX37C, Operator'S Manual

Page: 155 / 228

6 - MAINTENANCE
Every 10 hours
Engine oil level
Check the engine oil level every 10 h or every day
Lubricant: CASE AKCELA NO. 1™ ENGINE OIL SAE 15W-40
1. Park the machine on a flat and level place. Stop the
engine, and remove the starter key.
2. After stopping the engine for 15 min or more, open the
engine door.
Remove the dipstick (1) , and wipe oil off the dipstick
with a clean cloth.
Reinsert the dipstick (1) into the guide tube as far as it
will go, and then take it out.
3. The engine oil level is optimal when the level is between
the lower (minimum) and the upper (maximum) marks
(A) .
4. If the oil level is at or below the lower mark on the
dipstick (1) , remove the fill plug (2) and pour in oil until
the level reaches the upper mark.
NOTE: make sure that the oil level is not above the upper
mark (maximum) on the dipstick (1) . Doing so will cause
such problems as poor fuel economy and an abnormal rise
in coolant temperature.
5. Install the fill plug (2) .
SMIL16MEX1493BB
1
6-19