CASE CONSTRUCTION CX37C Operator'S Manual Download

Page: 194 / 228

6 - MAINTENANCE

Control levers

Grease the hydraulic control levers when necessary
Fluid:

CASE AKCELA MOLY GREASE

1. Remove the bellow

(A)

from the control lever.

2. Use a grease gun and grease the joint part

(X)

and the

sliding parts

(Y)

3. Repeat the same operation for the other hydraulic con-

trol lever.

SMIL16MEX0443BA

Plastic and resin parts

Use a soft, slightly humid, cloth to clean the panels, the
consoles, and the switches. Use a soft, dry cloth to
clean the instrument cluster.

NOTICE:

do not use gasoline, kerosene, paint solvents.

The use of gasoline, kerosene, paint solvents, etc. will
cause discoloration, cracks or deformation of the parts.

6-58

Summary of Contents for CX37C





































































































































































































































Search results

Summary of Contents for CX37C

Reviews:

Related manuals for CX37C

Brands by name

Popular brands

CASE CONSTRUCTION CX37C, Operator'S Manual

Search results

Summary of Contents for CX37C

Reviews:

Related manuals for CX37C

Brands by name

Popular brands