6 - MAINTENANCE
Starting the engine with booster cable
WARNING
Improper operation or service of this machine can result in an accident.
An error connecting auxiliary starting cables or short-circuiting battery terminals can cause an acci-
dent. Connect auxiliary starting cables as instructed in this manual.
Failure to comply could result in death or serious injury.
W0263A
Connection of booster cable
Make sure that the booster battery voltage corresponds
to the voltage system of the machine.
Make sure that the starter key is in OFF position and the
safety lock lever in rearward position (LOCK position).
Make sure to use supply cables of appropriate dimen-
sions.
Make sure that the starter key of the machine with the
charged battery is in OFF position.
1.
Connect the red terminals
(R)
of booster cable to
the battery
(+)
terminals between exhausted bat-
tery positive terminal
(1)
and new battery positive
terminal
(2)
.
2.
Connect the black terminal
(B)
of the booster ca-
ble to the battery
(-)
terminals between new battery
negative terminal
(3)
and chassis
(4)
of the ma-
chine with the exhausted battery.
3.
Connection order:
(1)
,
(2)
,
(3)
,
(4)
SMIL16MEX0459AB
5
Starting the engine of the machine
1.
Start the engine of the machine with the charged
battery and keep it to run at high RPM.
2.
Start the engine of the machine with the exhausted
battery
3.
If the engine does not start, restart after two min-
utes.
Disconnection of booster cable
1.
Disconnection order:
(4)
,
(3)
,
(2)
,
(1)
2.
Remove the black booster cable
(B)
.
3.
Remove the red booster cable
(R)
.
4.
Run the engine at high RPM.
6-33
Summary of Contents for CX37C
