CASE CONSTRUCTION CX37C, Operator'S Manual

Page: 128 / 228

4 - OPERATING INSTRUCTIONS
• Set the safety lever to the LOCK position
(A) .
• Stop the engine, and remove the starter key.
NOTICE: do not shut off the engine when running at full
speed, but let it run at low idle speed for 5 min in order
to cool it down.
• Block both tracks by means of wedges.
• Close all windows of the cab.
• Using the starter key, lock the cab door, the engine
guards, the cooler cover, and the fuel filler cover.
NOTE: make sure that no part of the machine is interfering
with any public road. Install appropriate traffic signs if any
portion interferes public road.
LELI11E0241AB
3
If parking on a slope is unavoidable, orient the undercar-
riage along the slope, and lower and indent the bucket
(1)
and the dozer blade (2) into the ground. Follow the park-
ing procedure described above, and then make sure to
block both tracks by means of wedges
(3) as outlined in
the picture.
SMIL16MEX3074AB
4
If the machine is parked after an emergency stop, remove
the starter key, and place the "Do not operate" tag on
the machine controls. Get off the operator compartment,
and close the cab door. Block both tracks by means of
wedges, and define a safe area of at least
3 m ( 9.8 ft )
around the machine, cleaning this area from obstacles
and bystanders. Call the CASE CONSTRUCTION dealer
for assistance.
LELI11E0243AA
5
4-28