CASE CONSTRUCTION CX37C Operator'S Manual Download

Page: 139 / 228

6 - MAINTENANCE

Attachment

• Check that the cylinders are not leaking oil.

• Check the condition of all lines.

• Check the condition of the bucket teeth.

After starting the engine

• Did the engine start correctly? Are the exhaust fumes normal? Any strange noises?

• Check for abnormal noise on the hydraulic components.

• Check the components for signs of leaking oil or water.

• Check the audible alarm devices, working lights and windshield wipers.

• Check that all circuits (travel, swing and tool) are functioning correctly.

NOTICE:

if the slightest defect is found, repair it immediately before using the machine or consult your CASE CON-

STRUCTION Dealer.

6-3

Summary of Contents for CX37C





































































































































































































































Search results

Summary of Contents for CX37C

Reviews:

Related manuals for CX37C

Brands by name

Popular brands

CASE CONSTRUCTION CX37C, Operator'S Manual

Search results

Summary of Contents for CX37C

Reviews:

Related manuals for CX37C

Brands by name

Popular brands