CASE CONSTRUCTION CX37C, Operator'S Manual

Page: 126 / 228

4 - OPERATING INSTRUCTIONS
If the engine stops when traveling along a slope, immedi-
ately lower and indent the bucket
(1) and the dozer blade
(2) into the ground. Release all the controls, set the safety
lever to the LOCK position, set the engine speed throttle
to the low idle position, and then start the engine again.
If the engine does not start, remove the starter key, and
place the "Do not operate" tag on the machine controls.
Get off the operator's compartment, and close the cab
door. Block both tracks by means of wedges
(3) , and de-
fine a safe area of at least 3 m ( 9.8 ft ) around the ma-
chine, cleaning this area from obstacles and bystanders.
Call the CASE CONSTRUCTION dealer for assistance.
SMIL16MEX3074AB
15
4-26