CASE CONSTRUCTION CX37C, Operator'S Manual

Page: 173 / 228

6 - MAINTENANCE
8. Attach a new filter. Turn the filter until the seal touches
the filter head, and then tighten it further a half turn by
hand.
NOTE: do not use a filter wrench for tightening the filter.
Overtightening can damage the filter and its seal.
A. Open
B. Close
9. Install the drain plug.
SMIL16MEX1443AB
4
10. Add new engine oil to the engine. Install the fill cap.
11. Run the engine for several minutes to check that there
are no leaks at the filter and at the drain plug.
12. Stop the engine and check the oil level with the dip-
stick. Add oil if necessary.
NOTE: always wait 15 min to allow the oil to return to the
sump before checking the oil level.
13. Install the cover of the drain plug.
6-37