CAS CI-400 Series, Owner'S Manual

Page: 43 / 120

`
44
Menu-F1.04: Set Band Stop Filter
Function Band Stop Filter Setting
Display Part Meaning
Set Range
(0 ~ 1)
1-04 : XX
Initial Value : 0
Band Stop Filter use setting . (0: Not use, 1: Use)
Set Range
(1 ~ 1600)
H-FrEq
Initial Value : 60
Band Stop Filter High Frequency setting..
Set Range
(1 ~ 1600)
L-FrEq
Initial Value : 10
Band Stop Filter Low Frequency setting..
Reference 1.Uses BSP (Band Stop Filter). The BSP High Frequency, BSP Low Frequency setting menus
are only displayed in this mode.
Reference 2. When using BSP, set according to the environment.
Menu-F1.06: Set Stable Weight Range
Function Stable Weight Range Setting
Set Range
(0 ~99)
Display Part Meaning
1-06. XX
Initial Value :
1x 0.5 division
Stability lamp is turned ON when weight change is such that the width
of change in a given time is within the set value x 0.5 division
Reference 1. This function verifies the stable status when the weight fluctuation does not exceed 0.5x the
readability setting within the set time.
Reference 2. The number should be made large and small for high-vibration and low-vibration
environments respectively to quickly stabilize the weighing status.
Menu-F1.07: Set Automatic Zero-set Range
Function Automatic Zero-set Range Setting
Set Range
(0 ~ 99)
Display Part Meaning
1-07. XX
Initial Value :
1x 0.5 division
Stability lamp is turned ON when weight change is such that the
width of change in a given time is within the set value x 0.5
division
Reference 1. This function automatically corrects the zero-set if the weight does not exceed a set
readability range within a set time when at zero-set state.
Ex) If the MENU [F1-07] is set to "2" when the maximum labeled increment is 120.0kg and the value of a
single increment is 0.05kg