CAS CI-400 Series, Owner'S Manual

Page: 85 / 120

`
86
<1 Step Feeding, 2 Step Discharging Mode_2>
Relay Operation Graph upon Setting (F6.03-4)
1. Required set value input : Step 1(SP1) > Final(SP7) > Step 2(SP2) > Fall(SP3)
2.
SP1: Step1, SP2: Step2, SP3: Fall, SP5: Upper Limit NG, SP6: Lowest Limit NG, SP7: Final
3. Near zero output is according to the specified range in F1-23
4. T1 : Refer to F6.04 (Delay time of weighing Finish relay output)
T2 : Refer to F6.05 (Operation time of weighing Finish relay output)
T5 : Refer to F6.09 (Operation(ON) time of weighing NG relay output)
5. Relay Output
Step 1 : ON when ( SP1 ≤ Weight ), OFF When start input
Step 2 : ON When start input , OFF when {(SP7 – SP2) ≤ Discharge Weight},
Step 3 : ON When start input
,
OFF when {(SP7 – SP3) ≤ Discharge Weight},
Finish : On after T1 (set time), ON during T2 (set time)
Error : When weighing is completed { Discharge Weight < (SP7 – SP6)} or
{(SP7 + SP5) < Discharge Weight}, ON for the during of T5 (set time)
Near Zero : F1-23 set value ≥ Weight ≥ 0 range output
6. Status lamp in the front panel is operated in the same manner as the RELAY output.