CAS CI-400 Series, Owner'S Manual

Page: 82 / 120

83
<Packer mode> Relay Operation Graph upon Setting (F6.03-1)
1. Required set value input : Final (SP7) > Step 1(SP1) > Step 2(SP2) > Fall (SP3)
2.
SP1: Step1, SP2: Step2, SP3: Fall, SP5: Upper Limit NG, SP6: Lowest Limit NG, SP7: Final
3. Near zero output is according to the specified range in F1-23
4. T1 : Refer to F6.04 (Delay time of weighing Finish relay output)
T2 : Refer to F6.05 (Operation time of weighing Finish relay output)
T5 : Refer to F6.09 (Operation(ON) time of weighing NG relay output)
5. Relay Output
Step 1 : OFF when (SP7 – SP1 ≤ Weight )
Step 2 : OFF when (SP7 – SP2 ≤ Weight )
Step 3 : OFF when (SP7 – SP3 ≤ Weight )
Finish : On after T1 (set time), ON during T2 (set time)
Error : When weighing is completed {
Weight < (SP7 – SP6)} or
{(SP7 + SP5) < Weight}, ON for the during of T5 (set time)
Near Zero : F1-23 set value ≥ Weight ≥ 0 range output
6. Status lamp in the front panel is operated in the same manner as the RELAY output.