CAS CI-400 Series, Owner'S Manual

Page: 105 / 120

`
106
Appendix 2> Command Mode 1 Description
CAS <NT-500 Command>
Indicator Reception Function Indicator Response
dd RW CR LF Request for Weight Data Transmit the data in the set format upon command input
dd MZ CR LF Same as Zero Key
Execute the zero and retransmit dd MZ CR LF to PC
upon command input
dd MT CR LF Same as Tare Key
Execute tare and retransmit dd MT CR LF to PC upon
command input
dd PN 00 CR LF Input Item No.(00~50)
Change the item no. and retransmit dd PN 00
CR LF to PC upon command input.
dd OP CR LF Same as Start Key
Execute the start and retransmit dd OP CR LF
to PC upon command input
dd EM CR LF Same as Stop Key
Execute the stop and retransmit dd EM CR LF
to PC upon command input
* dd : Device ID. (ASCII Code : 0×30 (hex), 0×31(hex if the Device ID is “01”)
* 00000,00 : Set value for upper limit/lower limit/upper limit fall/lower limit fall
(ASCII Code : 0x30(hex), 0x30(hex), 0x33(hex), 0x34(hex),
0x35(hex) if the set value is “00345”)
* When it fails to execute the command : ! CR LF is transmitted to the computer.
* When there is an error in the command : ? CR LF is transmitted to the computer.