12” CHIPPER SERVICE
HYDRAULICS
60
•
Check hydraulic oil level daily. This
Carlton chipper is equipped with a sight
glass to check hydraulic oil level. If oil
can be seen in glass, oil level is good.
Only fill tank 7/8 full to allow for
expansion.
•
On a new chipper, change the hydraulic
oil filter when the chipper has been
operating for 10 hours. Replace with the
same type of in-tank filter element
supplied originally, available through
Carlton or Carlton dealers. From this
point on, change the filter every 200
hours of operation.
•
Change hydraulic oil every 500 hours of
operation or at least once a year
depending on use. Flush the hydraulic
tank when changing the hydraulic oil.
Replace oil if it has a burnt odor or if it
is contaminated. Replace oil if the
chipper has been stored for a long period
of time (all winter).
•
Drain the hydraulic tank using the drain
plug located on the bottom of the tank.
Dispose of used oil according to state
regulations.
Summary of Contents for 1712
