Carlton 1712, Owner'S Manual

Page: 71 / 165

12” CHIPPER MACHINE OPERATION
45
•
The chipper infeed tray must be closed
and locked when towing. Make sure the
spring lock pins are in position and the
tray is secured. First the lock pins
behind the infeed chute frame will have
to removed and put back into their
storage position. Make sure there is no
other obstruction, such as limbs, bark, or
leaves, in between the infeed chute and
the tray.
•
Secure the discharge chute. Rotate the
discharge chute back over the chipper
and lock the swivel releasing the lock
pin into one of the lock grooves. Make
sure the height adjustment is at the
lowest position so that the chute will not
be high enough to hit any overhead
obstructions and secure the handle. The
flap on the end of the discharge chute
needs to be lowered as far as possible so
that no debris comes out during travel.
Remove the wheel chocks before moving the chipper.
BOTH SIDES OF INFEED CHUTE
ROTATE CHUTE