Carlton 1712, Owner'S Manual

Page: 36 / 165

12” CHIPPER DAILY CHECKLIST
10
It is vital that the owner and operators inspect the chipper each day before operation. This
inspection will help identify potential problems that may arise during the workday. The
operators must get in the habit of performing this inspection each and every day. By performing
this inspection each day, the operators will help minimize downtime and costly repairs. This
inspection will also help to minimize risks associated with the operation of this brush chipper.
SAFETY:
DO NOT PERFORM MAINTENANCE OF ANY KIND (including routine inspections)
ON THIS MACHINE UNLESS:
•
The engine is turned off
•
The ignition key has been removed
•
The clutch is not engaged
•
All moving parts have come to a complete stop – NOTE: The cutter disk takes
several minutes to come to a complete stop
•
The cutter disk lock pin is installed in the disk lock tube
•
All machine parts have cooled completely
•
There is no operator at the controls to accidentally start the machine
•
At least 2 people are at the site where the maintenance is to be performed
•
Inspect Decals making sure all are in place, secure, and legible. (Not all decals are shown
here just a small representation)