12” CHIPPER MACHINE CONTROLS
26
•
Two hydraulic valves control the winch
on this chipper. The hydraulic winch
selector valve diverts hydraulic fluid
from the feed roller circuit and enables
the hydraulic winch circuit. Once the
hydraulic winch circuit is enabled the
winch control valve controls the
hydraulic winch motor.
•
The 9” chipper winch selector valve is
located on the hydraulic valve box.
There is a decal that shows the proper
operation (pictured at the right). Push
the valve to the left to turn the feed
wheels on and to the right to turn the
winch on.
•
The winch control lever is the right hand
lever on the hydraulic control lever
panel.
There is a decal next to the lever to
show proper operation of the winch
control. After the rope has been
attached to the tree, push the lever
in to pull the tree to the chipper.
Also use this lever position to
rewind the rope.
Pull the lever back to release the
pressure on the rope to remove the
rope from the tree once it has been
pulled to the chipper and has been
put into position to be run through
the chipper.
After use of the winch is finished
use the winch control lever to
rewind and secure the rope before
running the feed wheels. (The
winch selector will have to be
turned back to the Feed Wheels On
position to feed the tree through the
chipper.)
•
NEVER ALLOW ANYONE TO
OPERATE THE WINCH CONTROL
VALVE WHILE AN OPERATOR IS
IN THE VICINITY OF THE WINCH
ROPE!!! ROPE BURNS OR OTHER
INJURIES COULD OCCUR IF THE
PERSON BECAME ENTANGLED OR
TRIPPED BY THE ROPE.
HYDRAULIC WINCH
CONTROL VALVE
HYDRAULIC WINCH
SELECTOR VALVE
Summary of Contents for 1712
