Carlton 1712, Owner'S Manual

Page: 149 / 165

7. “User” setting
To enter the “user” programming phase, with the monitor ON keep key PROG
pressed for at least 2 seconds and until the first parameter "HI" (i.e. RPMs minimum
permitted value) is displayed. After an interval of 1 second the current programmed
value is displayed (es. 4800RPM).
Auto-Feed Reverse
RPM
h
Auto-Feed Reverse
RPM
h
1 sec.
press both "+" and "-"
Auto-Feed Reverse
RPM
h
1 sec.
The parameter is changed by using key “+” or “-“; switching key “PROG” allows to
go to next parameter “LO” (i.e. RPMs minimum permitted value). It is displayed
with same procedure.
Auto-Feed Reverse
RPM
h
Auto-Feed Reverse
RPM
h
1 sec.
press both "+" and "-"
Auto-Feed Reverse
RPM
h
1 sec.
The parameter is changed by using key “+” or “-“; switching key “PROG” allows to
go to next parameter “TYPE” (i.e. machine with reverse solenoid valve or without
reverse valve). It is displayed with same procedure.