12” CHIPPER SAFETY PRECAUTIONS
5
Before operating the chipper, read this manual, the engine manual, and all the safety decals
on the machine. Know all parts of the machine and their functions, especially the shut
down procedures in case of emergency. No inexperienced person may operate the chipper.
Inexperience may cause injury. It is the owner’s responsibility to ensure all operators are
trained and fully understand all safety and operational aspects of the chipper.
This machine was built with safety in mind. The guards and other safety devices only work
when kept in place and secured properly. Safety decals are placed on the machine as
reminders of how to operate the machine safely, pay attention to the instructions.
SAFETY FIRST ALWAYS!
This is the
Safety-Alert Symbol
. This symbol is placed on the machine and in
the manual to alert the operator to the potential for bodily injury or death. The
operator should pay close attention to the instructions whenever they see this
symbol.
The
Safety-Alert Symbol
will be accompanied by one of the following words:
DANGER, WARNING, or CAUTION
•
A
DANGER
symbol means that if the instructions are not followed the possibility of
serious personal injury or death is probable.
•
A
WARNING
symbol means that if the instructions are not followed there is a
possibility of serious personal injury or death.
•
A
CAUTION
symbol means there is an unsafe condition or practice that may cause
personal injury or property damage.
P/N 070000A
P/N 0700008
P/N 0700010
PERSONAL PROTECTION:
All personnel must wear eye and
ear protection, hard hat, short
fitted gloves without cuffs, long
sleeve shirt, long pants without
cuffs, and over the ankle work
boots with skid resistant soles
Do not wear loose-fitting clothing
Tie long hair back
Do not wear jewelry or long
dangling clothing; i.e. neckties,
long belts, or chains
Stay away from feed wheels
Keep away from moving parts
Only run in a well ventilated area
because of carbon monoxide
poisoning
Summary of Contents for 1712
