Carel gaSteam-UG, User Manual, Page: 92 / 128

92
ENG
Web server
g0300122EN rel. 1.0 - 01.12.2021
Type Add. Variable name Description Def. Min Max UoM Access
Boolean 157 DilDrainCfg.Daily-
Sched[1].Enable Drain to dilute - Daily scheduler (Monday) - enable TRUE RW
Boolean 158 DilDrainCfg.Daily-
Sched[2].Enable Drain to dilute - Daily scheduler (Tuesday) - enable TRUE RW
Boolean 159 DilDrainCfg.Daily-
Sched[3].Enable Drain to dilute - Daily scheduler (Wednesday) - enable TRUE RW
Boolean 160 DilDrainCfg.Daily-
Sched[4].Enable Drain to dilute - Daily scheduler (Thursday) - enable TRUE RW
Boolean 161 DilDrainCfg.Daily-
Sched[5].Enable Drain to dilute - Daily scheduler (Friday) - enable TRUE RW
Boolean 162 DilDrainCfg.Daily-
Sched[6].Enable Drain to dilute - Daily scheduler (Saturday) - enable FALSE RW
Boolean 163 DilDrainCfg.Daily-
Sched[7].Enable Drain to dilute - Daily scheduler (Sunday) - enable FALSE RW
Boolean 164 EnPeriodicDrain Enable periodic total drain (0=disabled, 1=enabled) FALSE RW
Boolean 165 UnitPause Unit setting paused (0=not paused; 1=paused) RW
Boolean 166 CylWorkHrRes_Sec-
ondary Secondary unit cylinder production hours reset command RW
Boolean 167 DisableVarUnitPause Disable pause from monitoring service (0: pause not disa-
bled, 1: pause disabled) RW
Boolean 171 EnManReq Enable manual production request RW
Boolean 172 Main_450 Main-Secondary 450 mode status (0 = NOT ACTIVE; 1 = ACTIVE) FALSE RW
Boolean 174 ManMode_Fan1 Fan 1 command in manual mode (0=OFF, 1=ON) RW
Boolean 175 ManMode_Fan2 Fan 2 command in manual mode (0=OFF, 1=ON) RW
Boolean 176 ManMode_Burner1 Burner 1 command in manual mode (0=OFF, 1=ON) RW
Boolean 177 ManMode_Burner2 Burner 2 command in manual mode (0=OFF, 1=ON) RW
Boolean 178 Man_DOutM5 Value of programmable digital output M5.2 (see DOutM-
5Cfg) RW
Boolean 179 Man_DOutM6 Value of programmable digital output M6 (see DOutM5Cfg) RW
Boolean 180 Man_OnOff Status Unit manual On/Off command RW
Boolean 182 ManMode_Burner3 Burner 3 command in manual mode (0=OFF, 1=ON) RW
Boolean 183 ManMode_Fan3 Fan 3 command in manual mode (0=OFF, 1=ON) RW
Boolean 186 CurrBlkAlrm_S_IsPresent At least 1 alarm active, Secondary unit RW
Boolean 187 CurrBlkAlrm_S_Warning At least 1 warning active, Secondary unit RW
Boolean 188 Alrm_HiBoilerTemp.
Active Alarm ALP09: High boiler temperature (>110°) RW
Boolean 189 Al_AntiFreeze_1_Sec-
ondary.Active Alarm ALA23: Frost protection check components, Second-
ary unit RW
Integer 1 SV_PwrReq Production request from supervisor 0.0 100.0 Percent RW
Integer 2 ManMode_msk Start manual mode (0=disabled; 1=outputs controlled
manually, 2=production request set manually) 0 RW
Integer 3 RegulationCfg.RegTyp Control mode (0 = External proportional signal; 1 = External
proportional limit; 2 = ON/OFF signal; 3 = Humidity
(one probe); 4 = Temperature (one probe); 5 = Hu
limit; 6 = Tempe limit; 7 = Humidity (two probes); 8
= Temperature (two probes)) 3 RW
Integer 4 ThrshAlrmDT Delay for each humidity/temperature threshold alarm 60 Seconds RW
Integer 5 MainPrbCfg.UITyp Main probe confi guration - Probe type 1 RW
Integer 6 LimitPrbCfg.UITyp Limit probe confi guration - Probe type 1 0 5 RW
Integer 7 WHardnessMan Water hardness value setting, if manual mode (0=0-10°F;
1=10-20°F; 2=20-30°F; 3=30-40°F; 4=Demineralised water) 4 RW
Integer 8 EvapCycleNoThrsh Set number of evaporation cycles for drain to dilute if
micro-fi lling mode not active (0 =AUTO) 0 MaxEvap
CycleNo RW
Integer 9 FillTScale Set additional fi lling time modifi cation after reaching green
LED level if micro-fi lling mode not active 100 20 100 Percent RW
Integer 10 DilDrainTScale Set drain time modifi cation 100 5 190 Percent RW
Integer 11 Scheduler.SchedDay-
ToSet Scheduler - Day to confi gure
(a value > 0 enables editing mode) 1 7 RW
Integer 12 SchedDayCfg[0].StartHr Scheduler - Time band start time (Monday) RW
Integer 13 SchedDayCfg[0].
StartMin Scheduler - Time band end time (Monday) RW
Integer 14 SchedDayCfg[0].
WorkMode Scheduler - Time band mode
(0=OFF, 1=ON, 2=ON+SET) (Monday) RW
Integer 15 SchedDayCfg[1].StartHr Scheduler - Time band start time (Tuesday) RW
Integer 16 SchedDayCfg[1].
StartMin Scheduler - Time band end time (Tuesday) RW
Integer 17 SchedDayCfg[1].
WorkMode Scheduler - Time band mode
(0=OFF, 1=ON, 2=ON+SET) (Tuesday) RW
Integer 18 SchedDayCfg[2].StartHr Scheduler - Time band start time (Wednesday) RW
Integer 19 SchedDayCfg[2].
StartMin Scheduler - Time band end time (Wednesday) RW
Integer 20 SchedDayCfg[2].
WorkMode Scheduler - Time band mode
(0=OFF, 1=ON, 2=ON+SET) (Wednesday) RW
Integer 21 SchedDayCfg[3].StartHr Scheduler - Time band start time (Thursday) RW
Integer 22 SchedDayCfg[3].
StartMin Scheduler - Time band end time (Thursday) RW
Integer 23 SchedDayCfg[3].
WorkMode Scheduler - Time band mode
(0=OFF, 1=ON, 2=ON+SET) (Thursday) RW
Integer 24 SchedDayCfg[4].StartHr Scheduler - Time band start time (Friday) RW
Integer 25 SchedDayCfg[4].
StartMin Scheduler - Time band end time (Friday) RW
Integer 26 SchedDayCfg[4].
WorkMode Scheduler - Time band mode
(0=OFF, 1=ON, 2=ON+SET) (Friday) RW
Integer 27 SchedDayCfg[5].StartHr Scheduler - Time band start time (Saturday) RW
Integer 28 SchedDayCfg[5].
StartMin Scheduler - Time band end time (Saturday) RW
Integer 29 SchedDayCfg[5].
WorkMode Scheduler - Time band mode
(0=OFF, 1=ON, 2=ON+SET) (Saturday) RW
Integer 30 UoM Unit of measure system (0 = not set, 1 = international
system, 2 = imperial system) 1 1 2 RW
Integer 31 Year Current year Years RW