68
ENG
User menu and unit confi guration
g0300122EN rel. 1.0 - 01.12.2021
To access this tab, enter the system menu and then click the “alarm thresholds” icon (3 - Fig. 11.l):
300090
_11
4
_
R02
2
1
Parameter
Description
Alarm thresh-
olds
Set alarm thresholds
Low humidity/temperature alarm threshold
High humidity/temperature alarm threshold
Limit humidity/temperature alarm threshold
Default:
low humidity/temperature 0% rH / 0°C(32°F);
high humidity/temperature 100% rH / 100 °C(°F);
high limit humidity/temperature 100% rH / 100
°C(°F);
Possible settings: 0 to 100
Tab. 12.b
Fig. 12.c
12.1.4
S
cheduler menu
300090
_1
08
_
R02
1
3
4
2
Parameter
Description
Scheduler
Enable time bands
Default: time bands disabled
Tab. 12.c
Fig. 12.d
After having enabled the scheduler (1 - Fig. 12.d) in the corresponding menu, the humidifi er operating intervals can be set for
one day (24h) and for the whole week (2 - Fig. 12.d) . A time band can be set with production disabled (OFF 1 - Fig. 12.w) ), en-
abled (ON 2 - Fig. 12.e)), or enabled with a specifi c set point (ON+SET, 3 - Fig. 12.e). Setting the ON time band, the unit uses the
main set point confi gured. If setting ON+SET, the specifi c set point for the time band can be confi gured.
300090
_1
07
_
R02
1
2
3
Symbol
Unit of measure
%
%rH
°C
Degrees Celsius
°F
Degrees Fahrenheit
Tab. 12.d
Fig. 12.e
Notice:
if control is by external signal, the humidifi er can only be switched ON (2 - Fig. 12.e) or OFF (1 - Fig. 12.e).
The “Special period” function (3 - Fig. 12.d) can be used to set
operation (or switch off ) for a specifi c period of time (from day
x to day y).
The “Special day” function (4 - Fig. 12.d) can be used to set
operation (or switch off ) on a
specifi c day.
300090_115_R01
300090_116_R01
Fig. 12.f
Fig. 12.g