63
ENG
Checks before commissioning
g0300122EN rel. 1.0 - 01.12.2021
Menu E. Settings(password)
Menu
Index
Description
Level
a. Control
Control type
Ea01
Set the type of control
Installer
Weights
Ea02
Set the weight of the two probes
Installer
Control proportional
to external signal
Ea03
Set the hysteresis, minimum production and max production
Installer
External ON/OFF
Ea04
Set the maximum production with
external ON/OFF control
Installer
Mod. control
(humidity probe)
Ea05
Set the set point, diff erential, min production,
max production
Installer
Integral function
(humidity probe)
Ea05a
Set the integral time and the neutral zone
Installer
Mod. control
(temperature probe)
Ea05c
Set the set point, diff erential, min production,
max production
Installer
Integral function
(temperature probe)
Ea05b
Set the integral time and the neutral zone
Installer
Limit probe
(humidity probe)
Ea06
Set the set point and diff erential
Installer
Limit probe integral
function (humidity probe)
Ea06a
Set the integral time and the limit probe
Installer
Limit probe
(temperature probe)
Ea06b
Set the set point and diff erential
Installer
Limit probe integral
function (temperature probe)
Ea06c
Set the integral time and the limit probe
Installer
Boiler op. hours
Ea07
Display boiler operating hours
Set maintenance pre-alert threshold
Service
Reset boiler op. hours
Ea07a
Reset hour counter and display last reset date/time
Service
Boiler operating hours (for the
secondary unit, if present)
Ea07b
Display boiler operating hours
Set maintenance pre-alert threshold
Service
Reset boiler operating hours (for
the secondary unit, if present)
Ea07c
Reset hour counter and display last reset date/time
Service
Burner rotation
Ea10
Set the burner activation sequence
Installer
Rotate the burners in series (if
rotation in series is enabled)
Ea11
Rotation setting disabled/on ignition/in production and rotation
hours
Installer
Burner rotation delay
Ea12
Set the burner rotation ignition delay
Installer
b. Func-
tions
En. Preheating
Eb02
Enable preheating
Set the water temperature to maintain
Set the off set
Installer
Part fi ll cycles
Eb03
Enable part fi ll cycles
Set part fi ll time
Installer
Micro-fi lls (if
micro-fi lling enabled)
Eb03a
Set the type of drain to dilute, drain duration and drain activation
period
Installer
Micro-fi ll scheduler
(if micro-fi lling and daily scheduler
enabled)
Eb03b
Set the drain to dilute daily activation time
Installer
Part fi lls on
secondary
Eb03d
Set part fi ll time on secondary unit
Installer
Drain due to inactivity
Eb04
Enable drain due to inactivity
Set the inactivity threshold
Installer
Periodical drain
Eb05
Enable periodical drain cycles
Set the threshold for the periodical drain cycles
Installer
Signal M5, signal M6
Eb07
Enable the output relay
Unit status (production) or maintenance pre-alert
Installer
Signal M5, signal M6
(for the secondary unit,
if present)
Eb07a
Enable the output relay
Unit status (production) or maintenance pre-alert
Installer
Blower unit
Eb08
Set on and off delay
for blower unit
Installer
Export logs
Eb09
Save the log of main variables to USB pen drive
Installer -
Service
Export alarms
Eb10
Save alarm log to USB pen drive
Installer -
Service
Frost protection
Eb11
Set the frost protection function
Installer
c. Confi gu-
ration
Main probe
Ec01
Main probe confi guration: 0-1V, 0-10V, 2-10V,
0-20mA, 4-20mA, NTC
Installer
Limit probe/2nd probe
Ec02
Limit probe confi guration: 0-1V, 0-10V, 2-10V,
0-20mA, 4-20mA, NTC
Installer
Wireless probes
Ec03
Set the wireless probes (main/limit)
Installer
Wireless probe 1
Ec04
Set the weight of probe 1
Set the communication times
Installer
Wireless probe 2
Ec05
Set the weight of probe 2
Set the communication times
Installer
Wireless probe 3
Ec06
Set the weight of probe 3
Set the communication times
Installer
Wireless probe 4
Ec07
Set the weight of probe 4
Set the communication times
Installer