CareFusion Alaris 8110 series, Service Manual

Page: 84 / 172

5B-12
CORRECTIVE MAINTENANCE
PCA Module
Alaris
®
Syringe Module (8110 Series)
Alaris
®
PCA Module (8120 Series)
Technical Service Manual
5.2.9 Removing Internal Frame Assembly
1. Remove one (
1
) screw attaching three
(
3
) ground wires to
IUI
Support Bracket.
2. Remove three (
3
) screws attaching
Internal Frame to Front Case Assembly.
3. Remove
IUI
Bracket Strap.
4. Remove one (
1
) screw attaching
IUI
Support Bracket to
IUI
Bracket.
5. Remove
IUI
Support Bracket and
IUI
Bracket.
6. Remove two (
2
) screws attaching
Internal Frame to Drivetrain Assembly.
7. Remove Internal Frame.
During Reassembly:
• Route Linear Sensor Harness between
IUI
Bracket and Internal Frame.
• Route Lock Assembly harness through
top of and under Internal Frame so that
Frame does not pinch harness when
attached to Front Case, and harness can
reach Logic Board
J13
.
5.2 DISASSEMBLY/REASSEMBLY
(Continued)
Drivetrain
Assembly
IUI Bracket
Ground wires
IUI Bracket Strap
IUI Support Bracket
Front Case
Assembly
Linear Sensor Harness
Internal Frame
Lock Assembly