CareFusion Alaris 8110 series, Service Manual

Page: 128 / 172

ILLUSTRATED PARTS BREAKDOWN
Syringe Module
7A-12
Alaris
®
Syringe Module (8110 Series)
Alaris
®
PCA Module (8120 Series)
Technical Service Manual
Figure 7A-5. Front Case Assembly - Part 2
307
327
486
Reference Figure 7A-4
(see CAUTION statements)
(see CAUTION statement)
(see CAUTION statements)
326
325
337
321
342
340
335
158
1
1
Reference “Corrective Maintenance” chapter,
“Removing Syringe Barrel Clamp Assembly”
section, for Shaft Seal (item
337
) installation
instructions.
• When replacing any Syringe Barrel Clamp
Assembly parts and a Park Position “Pin”
(versus a “Collar”) is installed, replace with
Front Case Assembly Kit (Table
7A-1
, item
9
;
Figure
7A-8
).
• Newer versions of the Park Position Collar and
Barrel Clamp are not interchangeable with
earlier versions. If either part requires
replacement and the hex head bit,
1
/
16
HX
,
1
15
/
16
”
length tool was used to remove the Park
Position Collar
0.062”
setscrew, both parts must
be replaced.
CAUTIONS
2 PL
2 PL