CareFusion Alaris 8110 series, Service Manual

Page: 44 / 172

Follow these procedures in order for the
most efficient disassembly of Syringe
Module subassemblies. To reassemble the
Syringe Module, reverse the disassembly
steps.
Before adhering gaskets and labels to the
instrument, clean the surface with a cotton
swab or soft cloth lightly dampened with
70%
Isopropyl Alcohol.
CORRECTIVE MAINTENANCE
Syringe Module
5A-2
Alaris
®
Syringe Module (8110 Series)
Alaris
®
PCA Module (8120 Series)
Technical Service Manual
5.2 DISASSEMBLY/REASSEMBLY
To avoid the risk of electrical hazard or
damage to the instrument circuitry, do not
spray fluids directly onto the instrument or
allow fluids to enter the instrument.
CAUTION
Table 5A-1. Required Materials, Supplies and Tools - Syringe Module
NOTE:
Contact/source information is subject to change.
• Silicone Grease, Dow Corning Molykote
33
, or equivalent (
http://www.dowcorning.com
)
•
#1
Phillips Screwdriver
•
#2
Phillips Screwdriver
• Small Diagonal Cutters
• Lint-free cloth (such as, Kimwipes or lint-free tissue)
The following items may be purchased from
TECHNI-TOOL
(
800.832.4866
; http://www.techni
–
tool.com
).
• Hex Head Bit,
1
/
16
HX
,
1
15
/
16
” Length,
TT #758SC0172
(used for
0.062
” Park Position Collar Setscrew)
• Power Bit, Ball Hex
5
/
64
,
¼ HX
,
3½
” Length,
TT #758SC0172
• Power Bit, Ball Hex
3
/
32
,
¼ HX
,
3½
” Length,
TT #758SC0173
• Torque Screwdriver with a minimum range of
3
-
15
in-lbs. Recommend torque screwdriver, Micro-
Adjustable,
TT #844SC5002
or
TT #304TO034
.
• Torx Bit, Size
T6
,
1
15
/
16
” Length,
TT #758SC0301
The following items may be purchased from McMaster-Carr (
562.692.5911
; http://www.mcmaster.com
).
• Insert-Bit Holder,
¼
” Hex Drive,
6
” Length,
#7225A42
• Insert-Bit,
0.05
” Hex Size,
¼
” Hex Shank,
1
” Length,
#8526A46
(used for
0.05
” Park Position Collar
Setscrew)
• Slotted Screwdriver,
1
/
8
” Tip Width,
3
” Long Blade,
#5682A37