CDE360 Vector Control AC Drive Chapter 6 Parameters Description
d2.17
Range: 0 ~ 60000
Default: 2000
Proportional gain
of flux current
loop
Proportional gain of flux current loop.
d2.18
Range: 0 ~ 60000
Default: 800
Integration time
of flux current
loop
Integration time of flux current loop.
d2.19
Range: 0 ~ 60000
Default: 2000
Proportional gain
of torque current
loop
Proportional gain of torque current loop.
d2.20
Range: 0 ~ 60000
Default: 400
Integration time
of torque current
loop
Integration time of torque current loop.
Note:
The system dynamic response characteristics in vector control can be adjusted by
setting the proportional gain and integral time of the current loop controller. Improper controller
parameter setting may cause overvoltage or over current trip.
d2.21
①
Range: 000 ~ 111
Default: 110
Vector control
optimization
mode
0: Disable
1: Enable
Unit
’s digit:
Loop control optimization
Ten’s digit:
Angle estimation optimization
Hundred’s digit:
Low frequency torque optimization
