Canon VB-C300, Administrator'S Manual

Page: 55 / 302

Storage Server Configuration Dialog
55
3
Stora
g
e
Ser
ver
Configuration
Ref
erence
●
User Management Tab
In the Storage Server Configuration dialog, User Management tab allows you to set up
users and their privileges.
User Management tab allows you to configure the following privileges:
Administrator
Not Administrator (Operator)
Administrator has access to the Viewer including Camera Server setup, recording
schedules and Viewer setup.
Users who have Operator Status cannot configure, register and change Camera Servers,
or configure and change recording schedules.
By default, a user called “admin” is created. The password is “NVR”. It is strongly
recommended that this should be changed after installation.
It is necessary to set up users on all Storage Servers. A particular user should be set up to
have the same password on each Storage Server.
Check to enable user to have
Administrator privileges (full access
to configuration functions).
Use Add to add users to this field.
There is no limit to the number of
users you can add.
Click Apply to save changes.
If the Authentication is required
when starting this tool box should be
checked.
COP
Y