Canon VB-C300 Administrator'S Manual Download Page 22

Page: 22 / 302

Operating Environment

Supported Camera Servers

The table below shows the Camera Servers supported by VK-64/VK-16.

This information is as of September 2008. For the latest information, please access
to Canon Web site.

Firmware Upgrade

The latest firmware information can be found on Canon Web site.

Camera Server

Firmware Versions

VB-C60

Ver. 1.0 0

VB-C300

Ver. 1.2 Rev. 77 or later

VB-C50FSi

Ver. 1.0 Rev. 77 or later

VB-C50FSi

Ver. 1.0 Rev. 77 or later

Ver. 1.0 Rev. 27 or later

VB150

Ver. 1.1 Rev. 42 or later

VB-C50iR

VB-C50i

VB-C10R

VB-C10

Ver. 1.0 Rev. 02 or later
Ver. 1.1 Rev. 0 or later

If using VB150 with multiple cameras, there are restrictions on
frame rate.
Refer to your VB150 User’s Manual for details (

➝

P. 36).

This version of the Storage Server and Viewer do not support
IPv6. Operate VB-C60 using IPv4.

The VB-C10, VB-C10R, and VB150 are not supported by VK-
Lite.

Note

COP

Summary of Contents for VB-C300















































































































































































































































































































Search results

Summary of Contents for VB-C300

Reviews:

Related manuals for VB-C300

Brands by name

Popular brands

Canon VB-C300, Administrator'S Manual

Search results

Summary of Contents for VB-C300

Reviews:

Related manuals for VB-C300

Brands by name

Popular brands