4
4
4-23
4-23
Parts Replacement and Cleaning Procedure > Main Units > Removing the Grate-shaped Upper Guide
Parts Replacement and Cleaning Procedure > Main Units > Removing the Grate-shaped Upper Guide
Main Units
Removing the Grate-shaped Upper Guide
1) Remove the 8 screws while lifting the paper holding guide, and
then remove the grate-shaped upper guide.
x8
F-4-42
F-4-42
CAUTION:
When reassembling, attach the grate-
shaped upper guide with the condition
lifted the shutter and the shutter link unit to
the maximum point, so that the projection
of the shutter link unit is put in the groove
of the shutter. After reassembling, move
the shutter up and down by hand to
confirm that a load is applied to the
shutter.
F-4-43
F-4-43
F-4-44
F-4-44
Summary of Contents for Staple Finisher-D1
