2
2
2-6
2-6
Technology > Feeding Unit > Basic Operations
Technology > Feeding Unit > Basic Operations
Finisher Controller PCB
[1]
[2]
S101
S102
[1]
Feed Path Senor detection
signal
S102
Feed Path Senor Detection
Sensor
[2]
Inlet Sensor detection signal
S101
Inlet Sensor Detection Sensor
F-2-7
F-2-7
T-2-3
T-2-3
Basic Operations
The feeding unit uses the following 4 sequences of operation:
[1] Straight Path Paper Feed Operation
The feeding unit delivers the paper that fed from the upstream connection machine on the
stacking tray without stacking the paper to the processing tray unit.
[2] Processing Tray Paper Feed Operation
The feeding unit stacks the paper that fed from the upstream connection machine on the
processing tray unit to shifts or staples it, and then delivers it on the stacking tray.
[3] Buffer Path Paper Feed Operation
The feeding unit feeds the paper that fed from the upstream connection machine to the buffer
path unit.
[4] Switching Over the Paper Path
The feeding unit feeds the paper that fed from the upstream connection machine to the
saddle stitcher unit.
[1]
[2]
[3]
[4]
F-2-8
F-2-8
Summary of Contents for Staple Finisher-D1
