manualshive.com logo in svg

Canon SADDLE FINISHER K3, Service Manual

Share
Download
Canon SADDLE FINISHER K3 Service Manual Download Page 73

COPYRIGHT© 2001 CANON INC. 

2000 2000 2000 2000

 CANON SADDLE FINISHER K3/K4 REV.0 MAR. 2001

2-42

CHAPTER 2  OPERATION OVERVIEW

2.5 Controlling the knurled belt

2.5.1 Overview

The primary function of the knurled belt is to ensure that sheets delivered to the process-

ing tray are drawn all the way to the stopper. When the shape of the knurled belt is normal,
the contact pressure the knurled belt applies to the stack varies according to the thickness of
the stack in the processing tray. Changes in the contact pressure interfere with proper con-
veyance of the sheets. Therefore, in this machine, the contact pressure of the knurled belt
does not affect the thickness of the stack, rather the normal pulling force on the belt alters
the shape. The amount of pulling force on the belt is exerted by the pulse control of the
knurled belt motor (M20).

F02-205-01

Release direction

Knurled belt.

Finisher Controller PCB

7

1   5

Knurled belt home 
position sensor (PI31)

Knurled belt motor
(M20)

J118B

J108

Summary of Contents for SADDLE FINISHER K3






















































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands