manualshive.com logo in svg

Canon SADDLE FINISHER K3, Service Manual

The Canon SADDLE FINISHER K3, a high-quality document finishing accessory, enhances productivity and efficiency. Ensure seamless stapling, folding, and booklet creation with this reliable device. Need assistance? Simply download the free Service Manual from manualshive.com to access comprehensive instructions for optimum performance.

Share
Download
background image

COPYRIGHT© 2001 CANON INC. 

2000 2000 2000 2000

 CANON SADDLE FINISHER K3/K4 REV.0 MAR. 2001

2-113

CHAPTER 2  OPERATION OVERVIEW

 3) The jogging plates wait at a position 10 mm from the edge of the paper.

F02-1203-11

4) When the next sheet of paper comes, steps 1) through 3) described above are repeated.
5) The paper is held for stitching. (Stitching is performed during this time.)

F02-1203-12

6) The jogging plates wait at a position 10 mm from the edge of the paper. (The stack is

then folded and delivered.)

F02-1203-13

7) When the first sheet of paper of the next stack reaches the paper sensor 1, the guides

move to a position 10 mm from the edge of the paper ready for the next alignment op-
eration.

F02-1203-14

Summary of Contents for SADDLE FINISHER K3






















































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for SADDLE FINISHER K3

Brands by name

Popular brands

Load more brands