COPYRIGHT© 2001 CANON INC.
2000 2000 2000 2000
CANON SADDLE FINISHER K3/K4 REV.0 MAR. 2001
2-131
CHAPTER 2 OPERATION OVERVIEW
12.6.2 Inlet delay jam (0091)
This occurs when the paper sensor 1 (PI77) on the paper sensor PCB fails to turn on after
the time specified by the pick-up signal from the finisher has elapsed.
F02-1206-02
12.6.3 Inlet stationary jam (00A1)
If the sensors on the paper sensor PCB (paper sensor 1 (PI60), paper sensor 2 (PI61) and
paper sensor 3 (PI62)) do not turn OFF after feeding has taken place for the specified time
after the sensors turned ON, the sensors used will depend on the size of the paper.
a. In the case of A3/279mm x 432mm (11 x 17) size
F02-1206-03
Pick-up signal
Paper sensor 1
(PI60)
Feed motor (M41)
Pick-up signal
Paper sensor 1
(PI60)
Feed motor (M41)
T
T
Load stop
Jam
320(mm)
Copier delivery speed (mm/sec)
T:
320(mm)
Copier delivery speed (mm/sec)
T:
Paper sensor 1
(PI60)
Feed motor (M41)
Paper sensor 1
(PI60)
Feed motor (M41)
Normal
Jam
Load stop
T
T
T: (Paper length x 1.5 feed) mm
T: (Paper length x 1.5 feed) mm