COPYRIGHT© 2001 CANON INC.
2000 2000 2000 2000
CANON SADDLE FINISHER K3/K4 REV.0 MAR. 2001
5-24
CHAPTER 5 TROUBLESHOOTING
a-2 If the inserter pickup tray is displaced to the rear (misalignment 2),
1) The inserter sheet arrives to the saddle stitcher unit toward the rear in relation to the ex-
isting stack.
2) Of the two aligning plates of the saddle stitcher, the one at the rear comes into contact
with the inserter sheet. The inserter sheet is held down by the feed path and is turned.
3) The inserter sheet and its host stack are stitched and folded while remaining out of
alignment (referred to as misalignment 2).
F05-102-02
Aligning plate
The inserter pickup
tray is toward the rear.
The sheet is pushed by
the aligning plate and is
displaced at an angle.