COPYRIGHT© 2001 CANON INC.
2000 2000 2000 2000
CANON SADDLE FINISHER K3/K4 REV.0 MAR. 2001
3-61
CHAPTER 3 MECHANICAL SYSTEMS
2) With three screws [4], secure the saddle
unit to the left middle rail [5].
F03-201-41
3) Fit the saddle unit inside. If no resis-
tance is felt, mount the saddle unit in-
side cover [7] with four screws [6].
F03-201-42
4) If resistance is felt when fitting the
saddle unit inside, slide it out, and
loosen the two screw on the left upper
stay.
5) Fit in the saddle unit.
6) Tighten the two screws on the left upper
stay.
7) Mount the saddle unit inside cover.
8) Mount the saddle unit PCB cover.
[5]
[4]
[4]
[6]
[7]
[6]