Canon OMNERA 400T, Planning Manual

Page: 80 / 90

Component Specification
Planning Guide 0180-095-485 OMNERA™400T
Page 6-12
Movements
The Wallstand is supplied with a counter-weighted vertical movement. The movement is
locked via an electro-mechanical brake which is normally active, thus the brake must be acti-
vated (released) before moving.
The tilt option enables the Wallstand to be used as a complement for a complete System so-
lution (including a Table), but may also be used as a supplement since the tilting function en-
ables vertical projections, e.g. under a Table or for extremities. The tilt is manually locked in
any positions (form -20 º to 90º) and is also supplied with mechanical indexes in three positions
(-20º, 0º, 90º).
Figure 6-11 Wallstand movement
315
1785
648
2048 04
315
1715 1715
20°
(2006)
(606)