Canon OMNERA 400T, Planning Manual

Page: 72 / 90

Component Specification
Planning Guide 0180-095-485 OMNERA™400T
Page 6-4
Vertical Movement Range
To be able to accomodate three different ceiling heights, one short and one long column are
used. The shorter column is used in configuration 1 and 2 whereas the longer column is used
in configuration 3.
Fully extracted, the short column reaches a length of 2180 mm and the longer column reaches
a length of 2530 mm. Adding the built-in measurements from the suspension, gives the total
length of the columns. The longer column (used in configuration 3) is also 100 mm longer when
fully retracted, giving a minimum length of 830 mm (short column, 730 mm).
Considering these facts, a trade-off between a high and low elevation must always be consid-
ered. For more information about the configurations,
see page 2-1.
NOTE !
Configuration 1 is always delivered with a 2748 mm traverse (Low ceiling), limiting the move-
ment range of the ceiling wagon.
Figure 6-2
170
0
145
0
1450
877
816
71
1
2500 -
2700
2700 -
2
850
2850 -
3
050
Configuration 1 Configuration 2 Configuration 3