Canon OMNERA 400T, Planning Manual

Page: 19 / 90

Environment Specifications
OMNERA™400T 0180-095-485 PlanningGuide
Page 2-11
Electrical Building Installation
The Machinery Directive 2006/42/EC requires the System to be fitted with means to isolate it
from all energy sources.
NOTE
!
When Service or Maintenance will be performed the technician shall lock the equipment from
all energy sources.
Power Ratings and Line Requirements
The System requires a three-phase electrical line with a protective earth ground (4 or 5 wires).
The transformers in the system cabinet requires a tap configuration (*1), the generator has an
automatic main line selection (no transformer tap configuration required). A disconnecting de-
vice shall be incorporated external to the equipment according to the national wiring rules.
•
3 Phase VAC ±10%
•
400VAC 50Hz
•
400VAC with neutral 50Hz
•
480VAC 60Hz
•
Maximum wire gauge 4 AWG (25mm²)
•
Required fuse 63A, 3-phase, b-curve
NOTE !
*1 For more information about tap configuration see Installation and Service Instructions.