Canon OMNERA 400T, Planning Manual

Page: 15 / 90

Environment Specifications
OMNERA™400T 0180-095-485 PlanningGuide
Page 2-7
Floor Specifications
The Table and the Wallstand must be installed on a solid base with sufficient load capacity (not
within scope of this document), e.g. concrete.
The floor must be able to withstand the pull forces supplied on the expansion bolts. The pull
forces for the components are listed in Table 2-4, see also
Fig. 2-4 and Fig. 2-5 .
The Table and the Wallstand must be leveled to 1 mm/m.
Figure 2-4 Drilling template,Table
Figure 2-5 Marking template, Wallstand (Isolation Plate)
A
D
B
C
B
C D
A