manualshive.com logo in svg

Canon MultiPASS F30, Software User'S Manual, Page: 86 / 170

Share
Download
Canon MultiPASS F30 Software User'S Manual Download Page 86

80   Scanning

Chapter 5

•

Change Monitor Profile

If the appropriate monitor profile is not displayed, click to change 
your monitor profile. Then, in the displayed list, click your 
monitor. If your monitor is not listed, click Canon’s Default 
Profile for Monitors.

Since the quality of your scanned image could be affected if the 
correct monitor profile is not selected, changing the monitor 
profile enables a better quality scanned image. 

4.

On the F50 tab (F30 tab), click where you placed the source image you 

are scanning:

5.

In the Paper Size list, click the size of the source image you are 

scanning.

Adjusting the Preview Image for Final Scan

6

Once an image has been previewed, you can adjust the image and the 
area in which it is viewed.

To resize a preview image, to better view its details:

1.

On the toolbar, click Zoom.

2.

To enlarge the view, left-click the mouse pointer on the image. 

To reduce the view, right-click the mouse pointer on the image.

To move an enlarged image:

If the image is too large to see in its entirety, on the toolbar, click Scroll 
and drag the zoomed image to display the appropriate section.

manual.book  Page 80  Wednesday, August 22, 2001  3:44 PM

Summary of Contents for MultiPASS F30











































































































































































Reviews:

No comments