manualshive.com logo in svg

Canon MultiPASS F30, Software User'S Manual, Page: 16 / 170

Share
Download
Canon MultiPASS F30 Software User'S Manual Download Page 16

10   Installing and Getting Started

Chapter 2

2.

Connect your printer cable to the ports on your printer and PC.

3.

Plug in your printer. Then, turn on the printer and PC.

With your PC on, close any open applications (including any virus 
checkers).

If a New Hardware Found, Update Device Driver Wizard, or Add 
New Hardware Wizard dialog box appears, click Cancel.

4.

Insert the installation disk into your disk drive.

If you are installing with a copy of the MultiPASS Suite located on 
another drive, skip to the next step.

5.

If AutoRun is enabled, the installation starts automatically.

If installation does not start automatically, or you are installing from 
the software copied on another drive, do the following: 
On the Windows taskbar, click Start, and then click Run. In the Run 
dialog box, type the following command and click OK (where D: is 
the drive containing the installation disk or copied software):

D:\csplash.exe

6.

When the main menu appears, click Install MultiPASS Suite.

manual.book  Page 10  Wednesday, August 22, 2001  3:44 PM

Summary of Contents for MultiPASS F30











































































































































































Reviews:

No comments