manualshive.com logo in svg

Canon MultiPASS F30, Software User'S Manual, Page: 149 / 170

Share
Download
Canon MultiPASS F30 Software User'S Manual Download Page 149

Chapter 8

Frequently Asked Questions   143

2.

Click Print Directly to the Printer. 

❏

Does an application error or General Protection Fault error appear?

❏

Check to see if the application you are using is compatible with the 

operating system you are using.

❏

If other applications are open, close them to increase the available 

memory. Try printing it again.

❏

Check to see if enough memory is allocated to the application. For 

application memory guidelines, see documentation for your 
application.

❏

If the problem only occurs when printing a specific document, try 

opening and editing the document. Try printing it again.

Paper Is Not Loading Correctly.

10

❏

Does paper not load into the unit?

The multi-purpose tray might contain too many sheets or paper might not 
be inserted all the way into the multi-purpose tray. 

❏

Does paper not feed through one sheet at a time?

Be sure to fan the stack of paper before placing it in the multi-purpose 
tray. Make sure the stack of paper does not exceed the paper limit mark.

❏

Does paper not feed through the automatic document feeder?

If paper jams in the automatic document feeder, on the printer, press 
Resume to continue feeding the jammed paper until it is removed from 
the printer. If pressing Resume does not work, open the feeder cover and 
remove the document gently; then close the feeder cover. 

❏

Is an envelope not loading correctly?

❏

Make sure you do not stack more than 10 envelopes in the multi-

purpose tray.

manual.book  Page 143  Wednesday, August 22, 2001  3:44 PM

Summary of Contents for MultiPASS F30











































































































































































Reviews:

No comments