manualshive.com logo in svg

Canon MultiPASS F30, Software User'S Manual, Page: 150 / 170

Share
Download
Canon MultiPASS F30 Software User'S Manual Download Page 150

144   Frequently Asked Questions

Chapter 8

❏

Perform roller cleaning. For more information about cleaning the 

rollers, see the 

Online Reference Guid

e.

The Print Quality Is Not Satisfactory.

10

❏

Are some of the characters not printing?

If characters are not printing, check that the printer cable is securely 
plugged in at both ends. Make sure your cable does not exceed the 
maximum length: 6.6’ (2m) for a parallel cable, 16.4’ (5m) for a USB cable.  
Check your application’s print setup to make sure the printer is selected.

❏

Do characters not fit on the page?

Make sure paper is aligned correctly in the multi-purpose tray. Check 
that margins and paper size are set correctly in your printing application. 

❏

Is printing not clear?

Check to see if you are printing using the Draft print quality option.

❏

Do fonts not print smoothly?

Bitmapped fonts designed for dot matrix printers will not look smooth 
when printed by high-resolution printers such as the Canon printer. 
Choose another font. Make sure you install an outline font manager such 
as Adobe Type Manager or Bitstream Facelift, or that you choose a 
TrueType font.

❏

Is the printing not dark enough?

You might be using Draft print quality. Try setting print quality to 
Standard. Try replacing the ink cartridge.

❏

Are pages printing blank?

❏

You may be running out of ink. Try replacing the ink tank.

❏

The print head may be dirty. Try performing a nozzle check to see if 

the print head needs to be cleaned. For more information, see the 
Reference Guide.

manual.book  Page 144  Wednesday, August 22, 2001  3:44 PM

Summary of Contents for MultiPASS F30











































































































































































Reviews:

No comments