Canon MultiPASS F30 Software User'S Manual Download Page 36

Page: 36 / 170

30 Printing

Chapter 3

Insert the banner paper into your printer. Make sure the printed

surface faces up.

Press down gently on the sheet until paper feeding starts.

To set your banner printing options and print your banner:

In the Printing Type box, click Banner Printing.

If the banner printing message box appears, click OK.

In the Printer Properties dialog box, click OK.

In the Print dialog box click the print command (usually OK or Print).

If you are prompted to accept your printing options, click OK.

Using Printer Control (Windows 95/98/Me)

You can define settings that control certain print operations.

On the Page Setup tab, click Printer Control.

In the Printer Control dialog box, click Background Printing if you

want printing to continue in the background while you process other
work on your PC.

If you selected Background Printing, click Print During Spooling if

you want printing to start while the document is being sent to the
print queue. Otherwise, printing will not begin until the entire
document is sent to the queue.

manual.book Page 30 Wednesday, August 22, 2001 3:44 PM

Summary of Contents for MultiPASS F30











































































































































































Search results

Summary of Contents for MultiPASS F30

Reviews:

Canon MultiPASS F30, Software User'S Manual, Page: 36 / 170

Search results

Summary of Contents for MultiPASS F30

Reviews: