manualshive.com logo in svg

Canon MultiPASS F30, Software User'S Manual, Page: 29 / 170

Share
Download
Canon MultiPASS F30 Software User'S Manual Download Page 29

Chapter 3

Printing   23

2.

In the Set Print Quality dialog box, move the print quality slider to 

choose the best balance between printing speed and print quality.

3.

Click the halftoning method:

•

Auto Fine (Auto in Windows NT/2000)

Click to automatically change dithering and diffusion based on 
the characteristics of the image. 

•

Auto Fast (Windows 95/98/Me)

When Quality is set to 5, Auto Fine changes to Auto Fast. Click to 
automatically change dithering and diffusion based on the 
characteristics of the image.

•

Dither and Dither Fast (Windows 95/98/Me)

Click to arrange image pixels in a fixed pattern to create 
halftones. This setting is suitable for business charts and graphics 
with well-defined color boundaries. Dither Fast prints at a higher 
speed after performing simple dithering.

•

Diffusion

Click to arrange image pixels randomly. This setting is suitable 
for photographs and graphics that require a finer color gradation.

manual.book  Page 23  Wednesday, August 22, 2001  3:44 PM

Summary of Contents for MultiPASS F30











































































































































































Reviews:

No comments