Canon MultiPASS F30, Software User'S Manual, Page: 26 / 170

20 Printing Chapter 3
Unless you save your settings as a print profile, your settings are
available only for the current print job.
Changes can be made to general quality print settings (such as media
type), and to page setup and special effects you want to apply to your
printed image.
You have two methods by which you can define print settings:
❏
Print Advisor
The Print Advisor displays as a wizard that guides you through a
series of questions. Your responses enable the Print Advisor to
automatically specify the appropriate print settings.
❏
Manually
You can manually change the individual settings to produce the most
desirable results for your printed documents.
To change print settings using the Print Advisor:
1. In the Print dialog box when printing your document, click
Properties.
2. In the Properties dialog box, on the Main tab, click Print Advisor.
3. Follow the on-screen instructions.
To change print settings manually:
1. In the Print dialog box when printing your document, click
Properties.
2. In the Properties dialog box, on the appropriate tabs or dialog boxes,
define your desired print settings.
3. If you are dissatisfied with your changes on a particular tab and want
to revert to the default settings, click Defaults.
4. To accept your changes and close the dialog box, click OK.
If available, to accept your changes while leaving the dialog box
open, click Apply.
To cancel your changes and close the dialog box, click Cancel.
manual.book Page 20 Wednesday, August 22, 2001 3:44 PM