manualshive.com logo in svg

Canon MultiPASS F30, Software User'S Manual, Page: 20 / 170

Share
Download
Canon MultiPASS F30 Software User'S Manual Download Page 20

14   Installing and Getting Started

Chapter 2

If the Sharing command is not available, you need to set up printer 
sharing in Windows. For details, see your Windows user 
documentation.

5.

In the Properties dialog box, on the Sharing tab, click Shared or 

Shared As.

6.

In the Share Name box (Windows 95/98/Me/NT) or Shared As box 

(Windows 2000), type a name you want to assign to the shared 
printer.

If available, you may also want to assign a password, which would 
then be required by the client system when using the printer.

7.

If your situation matches one of the following, set up an alternate or 

additional driver:

•

Windows NT/2000 server system sharing with Windows 95/98/

Me client systems

•

Windows 2000 server system sharing with Windows NT client 

systems.

For detailed instructions, see Appendix B in this guide.

8.

In the Properties dialog box, click OK.

To install the printer driver on a client system:

1.

On the server system, verify that the Status Monitor is running.

2.

On the client system, on the Windows taskbar, click Start.

3.

On the Start menu, point to Settings. Then click Printers.

4.

In the Printers window, double-click Add Printer.

5.

Follow the on-screen instructions.

Install the printer driver as a network printer, based on the name 
assigned to the shared printer.

manual.book  Page 14  Wednesday, August 22, 2001  3:44 PM

Summary of Contents for MultiPASS F30











































































































































































Reviews:

No comments