manualshive.com logo in svg

Canon MultiPASS F30, Software User'S Manual, Page: 147 / 170

Share
Download
Canon MultiPASS F30 Software User'S Manual Download Page 147

Chapter 8

Frequently Asked Questions   141

❏

Does paper not come out of the printer?

Parallel port only: Check that you have a bi-directional parallel cable 
connecting the printer to your PC. Check your computer’s setup to be 
sure the primary parallel port is set to the appropriate printer port, for 
example, LPT1 or LPT2. Make sure the Print Setup option of your 
printing application displays that the correct printer is being used.

❏

Is the printing not fast enough?

The print options you have selected might be too complex. Set print 
options to the basics, such as standard quality, automatic print mode, and 
so on. 

❏

Does the job not print when using DOS?

The printer driver can be used to print documents only in Windows; it 
cannot print a document in DOS.

❏

Are you unable to print?

❏

Your Windows application settings may be preventing you from 

printing successfully. Check the settings of the Windows application 
you are trying to print from.

❏

The printer driver may not be configured correctly. Try printing a test 

page with your printer driver. If the test page prints successfully, the 
printer and printer driver are set up appropriately. If the test page 
does not print successfully, you need to remove and reinstall the 
MultiPASS Suite.

❏

Are you unable to print to a shared printer?

If you are using a client system that is set up to use a shared printer, yet 
you are unable to print to the shared printer, check the following:

❏

That the server system, to which the printer is connected, is turned on

❏

That the server system has set the printer to be shared

❏

That the server system is set to allow your system access to the shared 

printer.

manual.book  Page 141  Wednesday, August 22, 2001  3:44 PM

Summary of Contents for MultiPASS F30











































































































































































Reviews:

No comments