manualshive.com logo in svg

Canon MultiPASS F30, Software User'S Manual, Page: 144 / 170

Share
Download
Canon MultiPASS F30 Software User'S Manual Download Page 144

138   Frequently Asked Questions

Chapter 8

To remove the device: Click Start, point to Settings and then click 
Control Panel. In the Control Panel window, double-click System. On 
the Hardware tab, click Device Manager. Under Other Devices, click 
the device and press the Delete key.

If you are unable to remove the device, turn the printer off, and then 
on again.

3.

Disconnect your printer cable from the port.

4.

Start the MultiPASS Suite installation process again. For instructions, 

see Chapter 2, “Installing the MultiPASS Suite.”

❏

For Windows 98/Me with USB port connection: Are you not able to 
complete the installation of the MultiPASS Suite?

During the installation, you may be unable to continue beyond the dialog 
box prompting you to connect your printer cable to your port. You cannot 
continue the installation of the MultiPASS Suite.

In this situation, you need to exit the MultiPASS Suite setup, remove the 
device from the Windows Device Manager, and restart the installation 
process.

To resolve this situation:

1.

Click No in the dialog box prompting you to connect your cable, and 

exit the MultiPASS Suite setup.

2.

Remove the device from the Windows Device Manager. The device 

may appear listed as Canon MultiPASS or Unknown Device.

To remove the device: Click Start, point to Settings and then click 
Control Panel. In the Control Panel window, double-click System. On 
Device Manager tab, under Other Devices, click the device and press 
the Delete key.

If you are unable to remove the device, turn the printer off, and then 
on again.

3.

Disconnect your printer cable from the port.

manual.book  Page 138  Wednesday, August 22, 2001  3:44 PM

Summary of Contents for MultiPASS F30











































































































































































Reviews:

No comments