manualshive.com logo in svg

Canon MultiPASS F30, Software User'S Manual, Page: 37 / 170

Share
Download
Canon MultiPASS F30 Software User'S Manual Download Page 37

Chapter 3

Printing   31

Using Stamps and Backgrounds 
(Windows 95/98/Me/2000)

4

You can add stamps and background images to your printed documents. 
The software contains a library of images to use as stamps or 
backgrounds, stored as .bmp files, that were installed with the software. 
You can also define a stamp or background of your own.

For example, you may want to use a stamp that designates the status of 
the document, such as confidential or a draft version.

To use a stamp:

1.

In the Printer Properties dialog box, on the Stamp/Background tab, 

click Stamp and then click a stamp in the list.

2.

To print the stamp over the text in your document, click Place Stamp 

Over Text.

Stamp/Background tab:
Windows 95/98/Me/2000
only

manual.book  Page 31  Wednesday, August 22, 2001  3:44 PM

Summary of Contents for MultiPASS F30











































































































































































Reviews:

No comments