manualshive.com logo in svg

Canon MultiPASS F30, Software User'S Manual, Page: 142 / 170

Share
Download
Canon MultiPASS F30 Software User'S Manual Download Page 142

136   Frequently Asked Questions

Chapter 8

❏

Your USB cable may be too long or defective. Check to make sure that 

the USB cable complies with the MultiPASS hardware requirements. 

❏

Is the printer connected to the computer using a parallel port?

❏

You might have disconnected the MultiPASS printer from the parallel 

port while the MultiPASS Suite was still running. Reconnect the 
printer to the parallel port, and then click Reconnect on the Status 
Monitor menu.

❏

You might have connected a printer other than the MultiPASS printer 

to the parallel port assigned to the MultiPASS printer while the 
MultiPASS Suite was still running. Reconnect the MultiPASS printer 
to the parallel port, and then click Reconnect on the Status Monitor 
menu.

❏

Your parallel printer cable may not be compatible with the printer. 

Check to make sure your cable complies with the MultiPASS 
hardware requirements.

❏

The printer may be attached to the wrong parallel port. Try changing 

the port assignment in the printer properties.

❏

A pass-through device, such as a ZIP drive, may be connected to the 

same parallel port as the printer. Try disconnecting the pass-through 
device. Then, reconnect the printer directly to the parallel port. 

❏

Another running program is using the same parallel port as the 

printer. Verify that all other printer software applications using the 
parallel port are closed. In addition, if you have multiple printers, 
assign the other printers to a different parallel port than the port used 
by the MultiPASS printer.

manual.book  Page 136  Wednesday, August 22, 2001  3:44 PM

Summary of Contents for MultiPASS F30











































































































































































Reviews:

No comments